The ultrasonic power supply generates high frequency electrical signals, which is applied to the piezoelectric crystals within the converter, where it is changed to mechanical vibration. The longitudinal vibrations are amplified by the probe and transmitted to the cleaning liquids, which consist of alternate compression and rarefactions. These pressure fluctuations create microscopic bubbles, which expand during the negative pressure excursions, and implode violently during the positive excursions. As the bubbles collapse, millions of shock waves (extreme in pressure and temperature) are generated at the implosion sites. This pressure is then used for disruption of cell structure
Technical Data
Model
Power (W)
Converter
Sample Volume
UP-100
100
1/8”
100ul~80ml
UP-500
500
1/8”, 3/16”, 1/4”, 1/2”
250ul~600ml
UP-800
800
1/8”, 3/16”, 1/4”, 1/2”, 3/4”
250ul~1200ml
UP-1200
1200
1/8”, 3/16”, 1/4”, 1/2”, 3/4”
250ul~1200ml
* Our Ultrasonic Processor is equipped with Converter, Tip
(UP-100: 1/8”; UP-500: 1/2”; UP-800: 1/2”; UP-1200:
3/4”), Sound Abating Enclosure, Elevator, Temperature Control
Sensor, External Pedal Switch, Power Cord.
Applications
This ultrasonic equipment includes a variety of applications such as
disruption of cell structure, e.g. bacteria, virus, spores. Besides, it
also has functions to homogenize, emulsify, intermix, degas,
disintegrate, and so forth. Therefore, it has been widely used in
research of biology, medical science, chemical, food, cosmetics,
environmental protection, and other related industries.
Features
Convenient and precise digital display and control.
Variable safe control of power output to protect samples.
Output amplitude can be adjusted according to the Tip size.
Intensity display with max intensity control.
Two operation options are available: pulse modulation and
constant output.
Pulse width and interval time can be set from 0.1 to 9.9 sec.
during pulse working.
External control interface is available for direct operation.
Frequency: 20KHz
Specifications
Introduction of front panel
Liquid crystal display
Max.intensity: the buttom is to control the ultrasonic output
intensity. It has 4 levels: 5mm, 5-8mm, 8-10mm and 10mm
Intensity: can change according to the Tip size.
Number inputting button
Start/Stop: operate or stop button.
Mode: The change button between pulse modulate and constant
output.
Pulse: To set the output amplitude in constant operation.
Imputing the number can set the time. Pulse wide is from 0.1 to 9.9
secs.
Timer: Display shows the set time and the time remaining in
minutes and seconds.
Notice: Interval pulse modulates can prevent accumulating too
much heating in the liquid and so can offer more effective result. The
temperature can be set and controlled.
(Notice: Over strong output power will damage the slender converter,
so please choose the position according to the following demand:)